Precision Ballscrews
Since KSS started production and sales of Ball Screw in 1978, we have been working on product development as a pioneer of Miniature Ball Screws. In addition, we developed Unit Products related Ball Screw. here are 2 types of KSS Precision Ball Screws, one of which is Standard Products in stock for short delivery, the other is Customized Products with flexible design.
Standard Products
To meet customer's request of quick delivery, KSS has specified model type in stock. The end-journal configuration is standardized and is possible to reduce numbers of design process by customer.
SG Series
Precision Ball Screws which are accuracy C3, C5 and have machined Shaft end at fixed side in advance are available. Short delivery is available by machining supported end in accordance with customer’s request.
SD Series
SD series are economical Ball Screws which moves bi-directionally with one Shaft, and perform centering, precise positioning. There are Precision Ball Screws C3, C5 grade.
Customized Products
In order to meet the needs of customer's requested design, we offer customized products.To reduce design process at customer, each Nut type is standardized.
Single Nut with Flange
It is most simple Single Nut type. Normally Ball Screws are used with small Axial play, but using oversized Balls allows for the application of light preloading and eliminates backlash (only Precision grade). Nut should be mounted using bolt holes in Flange. FBS (Return-plate), FKB (Internal-deflector), FDB (End-deflector), FEB (End-cap) circulation system can be distinguished.
Sleeve Type Single Nut
It is Cylindrical Single Nut which is compact. Alike Single Nut with Flange, Axial play can be eliminated (only Precision grade). The Nut should be mounted by clamping on the keyway on the Nut outer and Nut end surface.
Single Nut with M-Thread
The Cylindrical type with M-thread at the Nut end. The Nut should be mounted using M-thread. It is suitable for mounting with cylinder.
Square Type Single Nut
The Cylindrical type with M-thread at the Nut end. The Nut should be mounted using M-thread. It is suitable for mounting with cylinder.
Double Nut with Flange
A Spacer is inserted between the two Nuts to eliminate Axial play. Preloading can also be applied to increase Nut Rigidity. The Nut should be mounted using bolt hole in Flange.
Sleeve Type Double Nut
This uses two Cylindrical Nuts with a Spacer inserted between them to apply Preload. The Nut should be mounted by clamping on the Keyway on the Nut outer and Nut end surface.
Bi - directional Nut with Flange
Since there are both Right-handed thread and Left-handed thread on a Shaft, it has Bi-directional function. Single Nut with Flange type is standardized, but it is also possible to manufacture Sleeve type Nut. In addition, absolute position control for both Nuts is available.